UV Curing Spot Lamp
Product Description
HTLD-4II is a high-performance UV LED curing system designed for UV adhesive curing. The system mainly includes a controller, UVLED irradiation head and connecting wires. The UV LED irradiation head uses imported high-intensity ultraviolet LED integration, the UV spectrum wavelength is 365nm, and air cooling is used for heat dissipation. The effective curing area is 3-14mm in diameter and can be used on semi-automatic or fully automatic production lines.
Product Features
- Mercury-free, ozone-free, safe and environmentally friendly.
- Power-saving, simple and easy to operate.
- No need to preheat the machine, it can be used immediately after turning it on, and the maximum light intensity is reached instantly.
- It is not affected by the number of opening and closing times, and has a very long life.
- No infrared radiation, cold light source, suitable for the curing of various heat-sensitive materials.
Technical Parameters
Irradiation head parameters:
|
Wavelength |
365nm |
|
Light power density |
φ10mm-2200mw/cm2 (distance 25mm) Φ12mm-1800mw/cm2 (distance 30mm) |
|
Dimensions |
Length 68mm; outer diameter 12mm |
|
Connection cable length |
2m, 5m optional |
|
Light source |
3B grade LED |
|
Temperature/humidity range |
2-15~+50℃/25%~85%RH |
|
Input voltage |
220VAC 50Hz |
|
Cooling method |
Air cooling |
|
Service life |
>20,000 hours |
Controller parameters:
|
Model |
HTLD-4II |
|
|
Number of optical heads that can be connected |
Four |
|
|
Host size |
L168*W100*H145mm |
|
|
Terminal Block I/O |
HTLD-4II |
Foot switch and serial RS-232 communication signal |
|
Output |
Serial RS-232 communication signal |
|
|
Host cooling method |
Semiconductor natural cooling |
|
|
Power supply voltage |
AC100-240V±10%(50/60HZ) |
|
|
Power consumption of the whole machine |
20W |
|
|
Ambient temperature and humidity |
Ambient temperature: -10℃-50℃ Relative humidity: 25%-85%RH |
|
|
Dimming/irradiation control |
Digital debugging, manual irradiation control, foot control or timing control (0.1-999.9S) |
|
|
Setting operation |
Use the operation switch to set, power supply parameter switch, RS232 |
|
|
External Control |
External input |
Single irradiation input, irradiation stop input, interlock, all-on irradiation input, query switching |
|
External Output |
READY signal, error signal, warning output, BUSY output (for each optical head), +5V output (for indicator light) |
|
*Light sources with different wavelengths, different irradiation powers, and different irradiation areas can be customized as needed!!!
અરજી
*ઉપરોક્ત ડેટા ફક્ત સંદર્ભ માટે છે. અમારો સંપર્ક કરો વિગતવાર માહિતી અને કસ્ટમાઇઝ્ડ સોલ્યુશન્સ માટે.
