UV 램프 안정기
What is a UV lamp ballast?
A UV lamp ballast is an electronic device that serves to regulate and stabilize the electric current flowing through the UV lamp. The ballast is needed to start the lamp and maintain a constant electric current throughout the lamp's operation.
UV lamps require a certain voltage and current to start and operate properly. If the lamp is connected directly to the power grid, it can cause the lamp to fail or even catch fire. Therefore, a ballast is necessary to protect the lamp and increase its service life.
게다가, the ballast also serves as a current stabilizer, as UV lamps may require more current at startup than they do during normal operation. The ballast ensures a smooth start of the lamp and prevents current surges that can damage the lamp.
What are the types of ballasts?
There are different types of ballasts for UV lamps, including magnetic and electronic ballasts. Electronic ballasts are considered more efficient and reliable than magnetic ones, as they provide a smoother start of the lamp and have a higher efficiency factor. 게다가, electronic ballasts can have a start-control relay function, which allows the lamp to be turned on and off automatically.
The importance of compatibility between UV germicidal lamps and ballasts is often overlooked in practical applications, despite its crucial role. Currently, both magnetic and electronic ballasts are available on the market, with the latter being more environmentally friendly due to its energy-saving properties. SVELL offers a wide range of electronic ballasts and inverters compatible with lamps.
|
Type |
Input voltage (다섯) |
Input power (여) |
Input current (A) |
Lamp power (여) |
Lamp current(A) |
무게 (kg) |
Package size (mm) |
Minimum quantity (pcs) |
Package weight (kg) |
|
PH11-425-40 |
198-264 |
28-46 |
0.37A@230V |
10-41 |
0.39-0.43 |
0.21 |
450*290*120 |
36 |
8 |
|
PH11-425-40A |
99-132 |
28-46 |
0.70A@120V |
10-41 |
0.39-0.43 |
0.21 |
450*290*120 |
36 |
8 |
UV lamp ballast, technical specifications
Current frequency:50/60Hz
Power factor:>0.55
Efficiency:>90%
Working frequency:40-70KHz
치수:165*42*26mm
Input cable length:430mm
Output cable length:480mm
Signal line length:480mm
Installation requirements
Cable thickness:0.5-1.0mm2
Monitor parameters:VF=1.8-3.6V LF=20-50mA
Installation restrictions
Disconnect the input power before installation or maintenance.
The ballast box must be grounded.
Do not short-circuit two wires of the four outputs.
Functions
- Start-up:Preheating
- Lamp status indication via DC signal output.
- DC5V 5mA: lamp on.
- DC 0V: Lamp fault or lamp on.
애플리케이션
- 공기 정화
- Cleaning aquariums
- Industrial water purification
You can order a ballast for a UV lamp, as well as receive complete instructions for its use by contacting our specialist .
*위의 데이터는 참고용입니다.. 문의하기 자세한 정보와 맞춤형 솔루션을 원하시면.
