Дом / Продукты / Расходные материалы для УФ-отверждения / Подробности

Точечная лампа УФ-отверждения

icon_pic_arrow_up

icon_pic_arrow_down

Описание продукта

HTLD-4II is a high-performance UV LED curing system designed for UV adhesive curing. The system mainly includes a controller, UVLED irradiation head and connecting wires. The UV LED irradiation head uses imported high-intensity ultraviolet LED integration, the UV spectrum wavelength is 365nm, and air cooling is used for heat dissipation. The effective curing area is 3-14mm in diameter and can be used on semi-automatic or fully automatic production lines.

Product Features

Mercury-free, ozone-free, safe and environmentally friendly.
Power-saving, simple and easy to operate.
No need to preheat the machine, it can be used immediately after turning it on, and the maximum light intensity is reached instantly.
It is not affected by the number of opening and closing times, and has a very long life.
No infrared radiation, cold light source, suitable for the curing of various heat-sensitive materials.

Technical Parameters

Irradiation head parameters:

Wavelength	365нм
Light power density	φ10mm-2200mw/cm2 (distance 25mm) Φ12mm-1800mw/cm2 (distance 30mm)
Размеры	Length 68mm; outer diameter 12mm
Connection cable length	2m, 5m optional
Light source	3B grade LED
Temperature/humidity range	2-15~+50℃/25%~85%RH
Входное напряжение	220VAC 50Hz
Cooling method	Air cooling
Service life	>20,000 часы

Controller parameters:

Модель		HTLD-4II
Number of optical heads that can be connected		Four
Host size		L168W100H145mm
Terminal Block I/O	HTLD-4II	Foot switch and serial RS-232 communication signal
	Output	Serial RS-232 communication signal
Host cooling method		Semiconductor natural cooling
Power supply voltage		AC100-240V±10%(50/60HZ)
Power consumption of the whole machine		20Вт
Ambient temperature and humidity		Ambient temperature: -10℃-50℃ Relative humidity: 25%-85%RH
Dimming/irradiation control		Digital debugging, manual irradiation control, foot control or timing control (0.1-999.9S)
Setting operation		Use the operation switch to set, power supply parameter switch, RS232
External Control	External input	Single irradiation input, irradiation stop input, interlock, all-on irradiation input, query switching
	External Output	READY signal, error signal, warning output, BUSY output (for each optical head), +5V output (for indicator light)